Common small holes in drywall include nail or screw holes, holes from wall anchors, and small dents or dings from everyday impacts[1]. For nail and screw holes—typically around 1/8 inch or smaller—a simple repair option is to clean the area and apply a thin coating of spackle or lightweight joint compound with a putty knife, then smooth and sand it for a flush finish. This method works well because these holes are so small that a single quick repair coat is all that’s needed before priming and painting[1][3].
For slightly larger holes—about 1/4 inch to 1/2 inch wide, such as those left by drywall anchors or small dents—the repair can be made by first sanding the surrounding area to remove rough edges, then applying spackle or joint compound over an adhesive mesh patch, if extra support is needed[1][11]. The adhesive patch supports the compound, ensuring that it bonds well and helps prevent future cracking.
In both cases, after applying the spackle or joint compound, it is important to let it dry fully, lightly sand the surface to smooth any imperfections, and then finish with a coat of primer and matching paint to blend the patch with the surrounding wall[2][7][8].
Get more accurate answers with Super Pandi, upload files, personalized discovery feed, save searches and contribute to the PandiPedia.
Let's look at alternatives:
- Modify the query.
- Start a new thread.
- Remove sources (if manually added).
